Pages

Monday 3 September 2012

enabling the gpio on the beaglebone

Currently in the process of building the hardware for the first beaglebone bufocam. The 1-wire and RTC clock have been mounted on some prototyping board (ebay). Cheapest supplier I found for board headers was rapid electronics - buy the larger ones and cut them down.

I want to add a couple of LED's to the inside of the box to give some user feedback that something is really happening. There are lots of guides already for this;

http://www.nathandumont.com/node/250
http://ninjablocks.com/blog/2012/1/20/setting-up-gpio-on-the-beaglebone.html
http://www.youtube.com/watch?v=SaIpz00lE84&feature=fvwrel

http://akademii.blogspot.co.uk/2012/02/beaglebone-gpio-testing.html
http://blog.makezine.com/2009/02/03/blinking-leds-with-the-beagle-board/

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License